CNC machined billet alloy clutch pressure plate with the essential "Needle roller lift" mechanism.
The billet pressure plate does not bend or flex like the original steel pressure plate which makes the clutch plates free off easier and bite better when clutch lever is released.
The needle roller lift mechanism fits in the end of the gearbox mainshaft and when the clutch lever is pulled in, the pressure plate lifts off the plates square and evenly and spins without any " wobble" this means the clutch springs can be tensioned up less than usual , and gives a much lighter and positive clutch, and better bite when the clutch lever is released.
SRMPP1 -
Fits all BSA and Triumph 3 spring clutches fitted to the following models:
BSA A50 and A65, Triumph Unit T120, T140
SRMPP2 -
Fits all BSA and Triumph 4 spring clutches fitted to the following models:
BSA A50 and A65, Triumph Unit T120, and Triumph pre-unit T100, T110 and T120
SRMPP3 -
Fits all BSA 4 spring clutches fitted to the following models.
BSA A7, A10, B31, B33 Goldstar Swingarm models only.
SRMPP4 -
Fits all Triumph 3 spring clutches fitted to the following models:
Triumph Unit 5TA, T100, TR5T
SRMPP5 -
Fits all Triumph 4 spring clutches fitted to the following models:
Triumph Unit 3TA, 5TA, T100